LOFTER-网易轻博

摊铺机螺旋布料器，包括壳体和驱动箱，壳体通过大臂与摊铺机主机体相连，驱动箱设置在壳体的中部，传动装置对称设置与驱动箱的左右两侧，通过传动装置连接至布料螺旋装置为其提供动力输出，布料螺旋装置包括：上下两两对称水平设置于驱动箱左右两侧的四个布料螺旋轴，每个布料螺旋轴一端设置于壳体上，另一端通过传动装置连接至驱动箱。但是这种螺旋布料器左右两侧的绞龙旋向不变，从而使得沥青不断的往螺旋布料器左右两侧输送，因此螺旋布料器内的沥青容易产生中间少、两边多的情况发生，进而导致摊铺机往路面上布料时，沥青由螺旋布料器中部往外分布不均。

免责声明丨 部分内容来源网络！本文仅供交流学习 , 版权归属原作者，部分图片、内容推送时未能及时与原作者取得联系，若来源标注错误或侵犯到您的权益烦请告知，我们将立即删除.

QQ邮箱：2870202745@qq.com

The auger of the paver consists of a shell and a drive box. The shell is connected to the main body of the paver through the boom. The drive box is arranged in the middle of the shell. The drive device is symmetrically arranged on the left and right sides of the drive box. The transmission device is connected to the auger device to provide power output. The auger device includes four auger shafts symmetrically arranged on the left and right sides of the drive box, One end of each cloth spiral shaft is arranged on the housing, and the other end is connected to the drive box through a transmission device. However, the twisting direction of the auger on the left and right sides of the spiral distributor is not changed, so that the asphalt is continuously transported to the left and right sides of the spiral distributor. Therefore, the asphalt in the spiral distributor is prone to occur with less in the middle and more on both sides, which leads to the uneven distribution of asphalt from the middle of the spiral distributor to the outside when the paver distributes the asphalt on the road.

Disclaimer | Part of the content comes from the network! This article is only for exchange and learning. The copyright belongs to the original author. Some pictures and content are not timely contacted with the original author when being pushed. If the source label is incorrect or infringes your rights and interests, please inform us and we will delete it immediately

QQ Email: 2870202745@qq.com