LOFTER-网易轻博

摊铺机螺旋布料器，包括壳体和驱动箱，壳体通过大臂与摊铺机主机体相连，驱动箱设置在壳体的中部，传动装置对称设置与驱动箱的左右两侧，通过传动装置连接至布料螺旋装置为其提供动力输出，布料螺旋装置包括：上下两两对称水平设置于驱动箱左右两侧的四个布料螺旋轴，每个布料螺旋轴一端设置于壳体上，另一端通过传动装置连接至驱动箱。但是这种螺旋布料器左右两侧的绞龙旋向不变，从而使得沥青不断的往螺旋布料器左右两侧输送，因此螺旋布料器内的沥青容易产生中间少、两边多的情况发生，进而导致摊铺机往路面上布料时，沥青由螺旋布料器中部往外分布不均。

免责声明丨 部分内容来源网络！本文仅供交流学习 , 版权归属原作者，部分图片、内容推送时未能及时与原作者取得联系，若来源标注错误或侵犯到您的权益烦请告知，我们将立即删除.

The spiral feeder of the paver includes a shell and a drive box. The shell is connected to the main body of the paver through a large arm, and the drive box is set in the middle of the shell. The transmission device is symmetrically arranged on the left and right sides of the drive box, and is connected to the spiral feeder device through the transmission device to provide power output. The spiral feeder device includes four spiral shafts symmetrically arranged on the left and right sides of the drive box, with one end of each spiral feeder shaft set on the shell and the other end connected to the drive box through the transmission device. However, the twisting direction of the augers on the left and right sides of this spiral distributor remains unchanged, which continuously transports asphalt to the left and right sides of the spiral distributor. Therefore, the asphalt inside the spiral distributor is prone to a situation where there is less in the middle and more on both sides, resulting in uneven distribution of asphalt from the middle to the outside of the spiral distributor when the paver distributes materials on the road surface.

Disclaimer | Part of the content is sourced from the internet! This article is for communication and learning purposes only, and the copyright belongs to the original author. Some images and content were not promptly communicated to the original author. If the source labeling is incorrect or infringes on your rights, please inform us and we will immediately delete it