版权归作者所有，转载请注明出处
福格螺旋下链轮凸缘轴轴套#4602202363
轴套在转轴上起到定位或保护轴的作用,比如转轴和填料之间就要用轴套,轴套磨损了就更换,成本低；如果轴磨损了更换成本高.一般可以用铸铁做成，也可以用铸钢做成。
免责声明丨 部分内容来源网络！本文仅供交流学习 , 版权归属原作者，部分图片、内容推送时未能及时与原作者取得联系，若来源标注错误或侵犯到您的权益烦请告知，我们将立即删除.
The shaft sleeve plays a role in positioning or protecting the shaft on the shaft. For example, a shaft sleeve needs to be used between the shaft and the packing. If the shaft sleeve is worn, it can be replaced at a low cost; If the shaft is worn out, the replacement cost is high. It can generally be made of cast iron or cast steel.
Disclaimer | Part of the content is sourced from the internet! This article is for communication and learning purposes only, and the copyright belongs to the original author. Some images and content were not promptly communicated to the original author. If the source labeling is incorrect or infringes on your rights, please inform us and we will immediately delete it
