摊铺机找平仪找平原理,在摊铺作业时,熨平板通过两侧牵引大臂由主机牵引进行摊铺,熨平板处于浮动状态,这种浮动式熨平板对路基不平整有初步的滤波和滞后效应,具有一定的调平功能,但它只能消除波长较短的凸凹不平,当摊铺机安装上自动找平系统后,调平装置的传感器检测出摊铺机因道路不平与基准平面的偏差,然后由处理器将该偏差信号进行放大、运算、比较、处理,并及时发出脉冲调节信号作用于相应原电磁阀,控制牵引大臂调节油缸升降,从而自动调整牵引大臂牵引点的垂直高度的变化。
免责声明丨 部分内容来源网络!本文仅供交流学习 , 版权归属原作者,部分图片、内容推送时未能及时与原作者取得联系,若来源标注错误或侵犯到您的权益烦请告知,我们将立即删除.
Leveling principle of paver leveling instrument: during the paving operation, the screed is pulled by the host through the traction boom on both sides to pave, and the screed is in floating state. This floating screed has a preliminary filtering and hysteresis effect on the subgrade unevenness, and has a certain leveling function, but it can only eliminate the roughness with short wavelength. When the paver is installed with the automatic leveling system, the sensor of the leveling device detects the deviation of the paver from the reference plane due to the uneven road, and then the processor amplifies, calculates, compares, and processes the deviation signal, and sends a pulse regulating signal to act on the corresponding original solenoid valve in time to control the lifting of the traction boom regulating cylinder, so as to automatically adjust the traction boom Change in the vertical height of the towing point.
Disclaimer | Part of the content is sourced from the internet! This article is for communication and learning purposes only, and the copyright belongs to the original author. Some images and content were not promptly communicated to the original author. If the source labeling is incorrect or infringes on your rights, please inform us and we will immediately delete it